Publications

International Journals

Hoai Linh Le Nguyen, Vay Siu Lo, Thien Tich Truong, Nha Thanh Nguyen, “Nonlinear analysis of three-dimensional hyperelastic problems using radial point interpolation method,” Vietnam Journal of Science and Technology, vol. 62, no. 5, pp. 1031–1043, Oct. 2024. https://doi.org/10.15625/2525-2518/19248
Thien Tich Truong, Binh Khanh Ngo, Nha Thanh Nguyen, Vay Siu Lo, “Enhanced meshfree method with nodal integration for analysis of functionally graded material sandwich curved shells,” Forces in Mechanics, Volume 17, December 2024, https://doi.org/10.1016/j.finmec.2024.100292
Thien Tich Truong, Nha Thanh Nguyen, Dinh Kien Nguyen, Vay Siu Lo, “A novel nodal integration technique for meshfree methods based on the Cartesian transformation approach in the analysis of curved shells,” Engineering Analysis with Boundary Elements, Volume 163, June 2024, Pages 69-83, https://doi.org/10.1016/j.enganabound.2024.02.018
Nha Thanh Nguyen, Vay Siu Lo, Dinh Kien Nguyen, Thien Tich Truong, “A novel extended integrated radial basis functions meshfree method for crack analysis in plate problem,” Engineering Analysis with Boundary Elements, Volume 160, March 2024, Pages 201-212, https://doi.org/10.1016/j.enganabound.2023.12.022
Thien T. Truong, Vay S. Lo, Minh N. Nguyen, Nha T. Nguyen & Kien D. Nguyen, “A novel meshfree radial point interpolation method with discrete shear gap for nonlinear static analysis of functionally graded plates,” Engineering with Computers, vol. xxx, 2022, https://doi.org/10.1007/s00366-022-01691-w
Nha Thanh Nguyen, Minh Ngoc Nguyen, Thai Van Vu, Thien Tich Truong, Tinh Quoc Bui, “A meshfree model enhanced by NURBS-based Cartesian transformation method for cracks at finite deformation in hyperelastic solids,” Engineering Fracture Mechanics, vol. 261, pp. 108176, 2022. https://doi.org/10.1016/j.engfracmech.2021.108176
Thai Hien Nguyen, Ngoc An Dang Nguyen, Quoc Khai Le, Anh Tu Tran, Thanh Nha Nguyen, Trung Nghia Tran and Tich Thien Truong, “The effectiveness validation of novel UVC air disinfection device in a hospital room using computational fluid dynamic (CFD) simulation,” BME 2020: 8th International Conference on the Development of Biomedical Engineering in Vietnam, vol. 85, pp. 859-867, 2021. https://doi.org/10.1007/978-3-030-75506-5_70
Trần Tuấn Minh, Nguyễn Quốc Hưng, Trương Tích Thiện, Nguyễn Thanh Nhã, Nguyễn Ngọc Minh, “Auxetic Structure Design: A Multi-material Topology Optimization with Energy-Based Homogenization Approach,” Modern Mechanics and Applications, Part of the Lecture Notes in Mechanical Engineering, vol. 1, pp. 1018-1032, 2021. https://doi.org/10.1007/978-981-16-3239-6_80
Vũ Văn Thái, Nguyễn Thanh Nhã, Nguyễn Ngọc Minh, Trương Tích Thiện, Bùi Quốc Tính, “A Meshfree Method Based on Integrated Radial Basis Functions for 2D Hyperelastic Bodies,” Modern Mechanics and Applications, Part of the Lecture Notes in Mechanical Engineering, vol. 1, pp. 990–1003, 2021. https://doi.org/10.1007/978-981-16-3239-6_78
Thien Tich Truong, Vay Siu Lo, Minh Ngoc Nguyen, Nha Thanh Nguyen, Dinh Kien Nguyen, “Evaluation of fracture parameters in cracked plates using an extended meshfree method,” Engineering Fracture Mechanics, vol. 247, pp. 107671, 2021. https://doi.org/10.1016/j.engfracmech.2021.107671
Minh Ngoc Nguyen, Nha Thanh Nguyen, Thien Tich Truong, Tinh Quoc Bui, “An efficient reduced basis approach using enhanced meshfree and combined approximation for large deformation,” Engineering Analysis with Boundary Elements, vol. 133, pp. 319-329, 2021. https://doi.org/10.1016/j.enganabound.2021.09.007
Nguyễn Thanh Nhã, Bùi Quốc Tính, Nguyễn Ngọc Minh, Trương Tích Thiện, “Meshfree thermomechanical crack growth simulations with new numerical integration scheme,” Engineering Fracture Mechanics, vol. 235, pp. 107121, 2020. https://doi.org/10.1016/j.engfracmech.2020.107121
M. N. Nguyen, N. T. Nguyen, T. T. Truong, T. Q. Bui, “Thermal-mechanical crack propagation in orthotropic composite materials by the extended four-node consecutive-interpolation element (XCQ4),” Engineering Fracture Mechanics, vol. 206, pp. 89-113, 2019. https://doi.org/10.1016/j.engfracmech.2018.11.036
M. N. Nguyen, T. Q. Bui, N. T. Nguyen, T. T. Truong, V. L. Le, “Simulation of dynamic and static thermoelastic fracture problems by extended nodal gradient finite elements,” International Journal of Mechanical Sciences, vol. 134, pp. 370-386, 2018. https://doi.org/10.1016/j.ijmecsci.2017.10.022
N. T. Nguyen, T. Q. Bui, and T. T. Truong, “Transient dynamic fracture analysis by an extended meshfree method with different crack-tip enrichments,” Meccanica, vol. 52, pp. 2363-2390, 2017. https://doi.org/10.1007/s11012-016-0589-6
T. Q. Bui, N. T. Nguyen, L. V. Le, M. N. Nguyen and T. T. Truong, “Analysis of transient dynamic fracture parameters of cracked functionally graded composites by improved meshfree methods,” International Journal of Solids and Structures, vol. 96, pp. 642-657, 2017. https://doi.org/10.1016/j.tafmec.2017.10.005
N. M. Nguyen, Q. T. Bui, T. T. Truong, S. Tanaka and S. Hirose, “Numerical analysis of 3-D solids and composite structures by an enhanced 8-node hexahedral element,” Finite Elements in Analysis and Design, vol. 131, pp. 1-16, 2017. https://doi.org/10.1016/j.finel.2017.04.002
N. M. Nguyen, Q. T. Bui, T. T. Truong, A. N. Trinh, I. V. Singh, T. Yu and H. D. Doan, “Enhanced nodal gradient 3D consecutive-interpolation tetrahedral element (CTH4) for heat transfer analysis,” International Journal of Heat and Mass Transfer, vol. 103, pp. 14-27, 2016. https://doi.org/10.1016/j.ijheatmasstransfer.2016.07.038
N. T. Nguyen, T. Q. Bui, C. Zhang, and T. T. Truong, “Crack growth modeling in elastic solids by the extended meshfree Galerkin radial point interpolation method,” Engineering Analysis with Boundary Elements, vol. 44, pp. 87-97, 2014. https://doi.org/10.1016/j.enganabound.2014.04.021
N. M. Nguyen, Q. T. Bui, T. Y and S. Hirose, “Isogeometric for unsaturated flow problems,” Computers and Geotechnics, vol. 62, pp. 257-267, 2014. https://doi.org/10.1016/j.compgeo.2014.08.003

National Journals

Siu Vay Lo, Tich Thien Truong, Nha Thanh Nguyen, “Analysis of cracked Reissner-Mindlin plate using an extended meshfree method,” Science & Technology Development Journal – Engineering and Technology, Dec 31, 2023, https://doi.org/10.32508/stdjet.v6iSI2.1066
Vay Siu Lo, Hien Thai Nguyen, Tich Thien Truong, Nha Thanh Nguyen, “Crack Analysis by Using An Extended Meshfree Method and Cartesian Transformation Method without Creating Subdomains,” Science & Technology Development Journal – Engineering and Technology, Dec 31, 2023, https://doi.org/10.32508/stdjet.v6iSI2.1067
Thai Van Vu, Vay Siu Lo, Hien Thai Nguyen, Nha Thanh Nguyen, “A meshless radial point interpolation method for finite deformation analysis of hyperelasticity,” Science and Technology Development Journal (STDJ), 2021. https://doi.org/10.32508/stdj.v24iSI1.3801
Minh Ngoc Nguyen, Tinh Quoc Bui, Vay Siu Lo, Nha Thanh Nguyen, “A 4-node quadrilateral element with center-point based discrete shear gap (CP-DSG4),” Vietnam Journal of Mechanics, 2021. https://doi.org/10.15625/0866-7136/16152
Trong Duc Nguyen, Trong Tran Hieu Huynh, Nha Thanh Nguyen, Hien Thi My Nguyen, Thien Tich Truong, “Finite element analysis for three dimensional hyper-elastic problems,” Science and Technology Development Journal (STDJ), 2021. https://doi.org/10.32508/stdj.v24iSI1.3797
Nha Thanh Nguyen, Minh Ngoc Nguyen, Thien Tich Truong, Tinh Quoc Bui, “An improved meshless method for finite deformation problem in compressible hyperelastic media,” Vietnam Journal of Mechanics, vol. 43, pp. 27-41, 2021. https://doi.org/10.15625/0866-7136/15332
Vay Siu Lo, Nha Thanh Nguyen, Minh Ngoc Nguyen, Thien Tich Truong, “Impact force analysis using the B-spline material point method,” Science & Technology Development Journal – Engineering and Technology, vol. 4, pp. 722-730, 2021. https://doi.org/10.32508/stdjet.v4i1.794
Thien Tich Truong, Bang Kim Tran, Vay Siu Lo, Nha Thanh Nguyen, Minh Ngoc Nguyen, “Bimaterial interface crack analysis using an extended consecutive-interpolation quadrilateral element,” Vietnam Journal of Science and Technology (VJST), Vol. 59 No. 5, pp. 14, 2021.
Vay Siu Lo, Nha Thanh Nguyen, Minh Ngoc Nguyen, Thien Tich Truong, “Free vibration analysis of cracked Kirchhoff-Love plate using the extended radial point interpolation method,” Vietnam Journal of Science and Technology (VJST), vol. 59, pp 14, 2021. https://doi.org/10.15625/2525-2518/59/6/15953
Minh Ngoc Nguyen, NhaThanh Nguyen, Minh Tuan Tran, “A non-gradient approach for three-dimensional topology optimization,” Vietnam Journal of Science and Technology, vol. 59, pp. 368-379, 2021. https://doi.org/10.15625/2525-2518/59/3/14996
M. N. Nguyen, T. T. Truong and T. Q. Bui, “An enhanced nodal gradient finite element for non-linear heat transfer analysis”, Vietnam Journal of Mechanics, vol. 41 (2), pp. 127-139, 2019. https://doi.org/10.15625/0866-7136/12977
N. T. Nguyen, B. K. Tran, T. Q. Bui, and T. T. Truong, “Extended Radial Point Interpolation Method for dynamic crack analysis in functionally graded materials,” Science & Technology Development Journal, vol. 18, pp. 59-64, 2015.
N. T. Nguyen, B. K. Tran, T. Q. Bui, and T. T. Truong, “Extended Radial Point Interpolation Method for crack analysis in orthotropic media,” Science & Technology Development Journal, vol. 18, pp. 5-13, 2015. https://doi.org/10.32508/stdj.v18i2.1066
N. T. Nguyen, T. Q. Bui, and T. T. Truong, “Enriched radial point interpolation method for stress intensity factors calculation in 2D elasto-dynamic cracked problem,” Journal of Science and Technology, vol. 52(5C), pp. 48-59, 2014.
N. T. Nguyen, B. K. Tran, T. Q. Bui, and T. T. Truong, “Elastostatic analysis of isotropic and orthotropic functionally graded structures by meshfree radial point interpolation method,” Journal of Science and Technology, vol. 52(5C), pp. 1-15, 2014.

Books

T. T. Thiện, N. T. Nhã, N. N. Minh and T. K. Bằng, Các phương pháp số trong phân tích kết cấu, Đại học Quốc gia TP. Hồ Chí Minh, 2019.
T. T. Thiện, N. T. Nhã and T. T. Dương, Mô phỏng Động lực học Cơ hệ Vật rắn bằng SOLIDWORKS, NXB Đại học Quốc gia TP. Hồ Chí Minh, 2018.
T. T. Thiện and N. T. Nhã, Tính toán kết cấu, NXB Đại học Quốc gia TP. Hồ Chí Minh, 2016.